CHAIN, GEAR, CABLE & ROPE LUBRICANTS
CHAIN & CABLE LUBRICANT Aerosol or 5 gallon pail #CPT865
A rust protective lubricant that penetrates to the core of cable and chain. Provides superior friction reduction and wear resistance. Thick formula base helps prevent throw off and weather wash out. Fortified with Molybdenum Disulfide to withstand extreme temperature and pressure. Unique dual spray valve spray ñ pencil or fan spray.
B.L. 90® GEAR OIL #S7303
An extreme pressure climbing gear oil, containing highly refined oil stocks and special additives, for longer life and improved gear lubrication. Flash Point: 520 °F (C.O.C.)
HIGH LOAD EXTREME PRESSURE GEAR OILS USDA: H2 #ARL-399 (SAE90), #ARL-379 (SAE140) AND #ARL-380 (SAE85W-140) These multi-purpose gear oils are formulated with premium quality paraffin based stocks especially for heavy-duty requirements. Meets GL-5 requirements. These products are designed to withstand the most severe shock loads. They are specially blended with extreme pressure additives and adhesive and cohesive agents that make the gear oil immediately climb and cling to provide maximum protection. The gear oil is non-foaming, and will not mix and emulsify with water. May be used in virtually all types of enclosed gears. Timken Load: 60
HIGH LOAD® WITH MOLY USDA: H2 #ARL-399M (SAE90), #ARL-379M (SAE140), #ARL-380M (SAE85W-140)
Oil soluble Molybdenum has been added to High Load to increase service life and give extra high performance. Advantages gained by using Moly: Reduce friction up to 38%, reduce bearing wear up to 60% and reduce operating temperatures. Timken Load: 60
OPEN GEAR AND CABLE LUBRICANT Aerosol or 5 gallon pail #CPT780
A high tack lubricant, which penetrates deep into gear teeth and cable before thickening to a heavy black stringy lubricant. Automatically re-coats gear teeth with each revolution of the mechanism. Contains high wear resistance additives to prevent viscosity breakdown and spin-off. Unique dual spray valve spray - pencil or fan spray.
SILVER SPUR CHAIN AND CABLE LUBRICANT #AG00352
This is an outstanding, full service, multiple application chain and cable lubricant with moly added for extra protection and longer lasting results. To be used on chains, cables, wire ropes, sprockets, drive chains, hoist chains, drag chains and conveyor chains. Very water and acid resistant. Can be brushed, sprayed, dipped or poured on surfaces.
SPECIAL WIRE ROPE LUBRICANT #AG00353
This product is an outstanding, multi-purpose wire rope lubricant with Moly, for lubrication and hard film protection of cables and wire ropes. It is designed to provide excellent lubrication of wire ropes and cables. Penetrates the wire rope to lubricate the core and then dries to a hard film in 20 to 30 minutes to protect the outer surface.
SUPERFILM INDUSTRIAL GEAR LUBE® #ARL-375 (SAE90) AND #ARL-375 (SAE140)
An outstanding gear oil formulated for the higher temperatures and pressures that are being found in today's industrial In-Plant applications. Meets U.S. Steel 220, 224, and A.G.M.A. Gear Oil specifications. TIMKEN LOAD: 100
SUPERFILM COMPRESSOR OIL® #AG00369 (SAE10/IS032), #AG00365 (SAE30/IS0100)
These superior oils meet and exceed the requirements of both reciprocating (piston type) and rotary/screw compressors. These oils provide excellent rut, oxidation and corrosion resistance as well as anti-wear and anti-scuff properties.
SYNTHETIC BLEND COMPRESSOR OIL #AG00360
This excellent compressor oil is formulated with synthetic polyalphaolefin and high VI paraffin base oils to exceed the performance levels of the best petroleum based compressor oils. This is proven by the fact that this oil passes a 5000-hour A.S.T.M. D-943 oxidation test, far superior to results gained with petroleum-based oils. It can be recommended for service in reciprocating and rotary/screw compressors. Available in S.A.E. 10s-40.
CUTTING & TAPPING FLUIDS
LIQUID COOL® CUTTING AND TAPPING FLUID Aerosol #CPT875
A clear, synthetic coolant and lubricant designed to disperse heat and extend tool life. Convenient aerosol is handy for field operations. Works on exotic metals. Non-irritating to the skin. Transparent fluid provides clear view of work area. Includes extension tubes
Misty® CUTTING FLUID Aerosol #LAMR-A395 USDA: H2
A heavy-duty, concentrated cutting oil fortified with active sulfur and an extreme pressure additive. Formulated for use in all types of machine shops. This low-foaming coolant/lubricant protects cutting tools from rust and provides quality-machined parts. Not recommended for use on copper or aluminum. 14 oz. Aerosol. 12 cans per case.
TOOL KOOL® SYNTHETIC CUTTING LUBRICANT #S4326
A clear synthetic lubricant for the machining, cutting and grinding of ferrous and non-ferrous metals. May be used undiluted or extended with water depending on specific job requirements. Formula includes rust inhibitors and anti-fungus agents. Dilution: Up to 1-20 parts water.
DRY MOLY LUBRICANT
DRY MOLY LUBRICANT® Aerosol or 5 gallon pail #CPT955
An extreme condition, dry, friction reducing lubricant and anti-seize coating. Withstands high temperatures and extreme pressures. Provides a dry film lube especially suited for use in dirty or dusty atmospheres. Burnishes into metal to provide long-term lubrication and protection. Inert to water, oil, alkalis, and acids.
FOOD EQUIPMENT LUBRICANT
PRIMO® FOOD EQUIPMENT LUBRICANT - Aerosol or 5 gallon pail #CPT945
A super pure, highest USDA authorized, food grade oil. Lubricates rings, slides, pistons, seals and other food equipment parts that may have incidental food contact. Provides a thin, water resistant film. Contains no silicones or solvents - only food grade ingredients.
X-10® FUEL CONDITIONER #ARL-420
A modern concentrated fuel conditioner that is specifically engineered to answer the needs of today's high performance engines and is blended to neutralize harmful fuel acids, as well as eliminate the damage caused by sulfur, gum varnish and moisture found in all fuels. Other advantages: a cleaner more complete combustion, increased mileage, cleans injectors and carburetors, and in general to improve performance, reduce downtime and maintenance costs. Recommended for gas, diesel or L.P.G. engines. Typical dilution is 1 gallon of X-10 to 200 gallons of fuel. EPA registered.
CF5D DIESEL FUEL STABILIZER (With Cetane and Flow Improver With Added Lubricity) #ARL-421
This is a concentrated diesel fuel stabilizer which includes excellent flow and cetane improvers. The total formula is designed to overcome problems encountered by many diesel operators using todayís fuel. The flow improver modifies the fuelís wax crystals so that low temperature flow and filter plugging problems are prevented. A diesel ignition improver raises the cetane performance of the fuel, resulting in easier starts and better operation. An anti-oxidant improves the stability and quality of the fuel during storage. A gum dispersant keeps injectors and internal parts clean. A moisture displacing corrosion inhibitor is used to protect from rust and corrosion-especially diesel injectors. Use in Diesel engines only. Mix one gallon of CF5D with up to 1000 gallons of fuel in storage. EPA registered.
FI-50 DIESEL FUEL FLOW IMPROVER #ARL-422
This is an advanced formulation diesel fuel flow improver used as a corrective treatment for the low temperature gel problems with #2 diesel fuels. FI-50 treats the wax crystal by modifying their shape and size to retard or prevent them from sticking together, thus assuring fuel flow at low temperatures. This product is effective to -40 °F. Use up to 1 gallon of FI-50 to every 1000 gallons of fuel. Diesel only. EPA registered.
MDA7 STARBRITE DIESEL FUEL IMPROVER WITH ALGAE POWER #A4L-423
A multi-functional diesel fuel improver designed to prevent the problems associated with algae, particularly odor, corrosion, plugging and sludge problems. Use 1 gallon of MDA7 Starbright to every 1000 gallons of fuel. Diesel and heating oils. EPA registered.
BIG RED HIGH TEMP® HI-TEMP EP GREASE #S7320 USDA: H2
An excellent all-purpose lithium complex lubricant formulated for superior performance with high temperature and high-pressure capabilities. Flash Point: 350 °F.
Misty® RED GREASE EXTRA HEAVY-DUTY NON-MELT GREASE #LAMR-RL726 USDA: H2
An extra heavy-duty, non-melt grease specially formulated with extreme pressure and anti-wear additives. Has extra tackifiers to provide excellent adhesive and cohesive properties. Resists most acids, salt, dirt, salt spray, steam, corrosion and oxidation. Timken load 65. 14 oz. Tube. 48 tubes per case.
RED HOT® RED SPRAY GREASE Aerosol #CPT980
A special penetrating formula that sprays as a liquid to flush off old contaminated lubricant, creep deeply into working parts and then set up to a viscous, thick grease. Withstands temperatures up to 500 °F. Highly resistant to water, acid and detergent wash. Includes extension tubes.
ULTRA PURE® FOOD GRADE GREASE Aerosol #CPT989
This formula has the highest USDA authorization for a lubricant with food contact. A high viscosity, high temperature grease specially formulated for the food packaging and pharmaceutical industry. Protects equipment against rust, oxidation and wear. Resists throw off shear breakdown and water and detergent wash out.
WHITE LUBE® WHITE LITHIUM GREASE Aerosol #CPT990
An all-weather, heavy duty, multi-purpose penetrating grease. Sprays as a liquid, creeps to lubrication point like an oil, then cures to a thick, water resistant grease. Provides non-staining lubrication that guards surfaces against rust and corrosion. Heat stable to 350 °F. Includes extension tubes.
SUPERFILM® HYDRAULIC OILS USDA: H2 #ARL-381 (SAE10/IS0 32), #ARL-382 (SAE20/IS0 68), #ARL-383 (SAE20/IS0 46) and #ARL-384 (SAE30/IS0 100)
These anti-wear hydraulic oils represent the most advanced blend of highly refined paraffin based oils and special additives to assure long oil life under heavy-duty applications. These products are specially formulated with high viscosity index based stocks and anti-wear additives to give excellent temperature and oxidation stability, and to provide maximum protection of systems. Our oils offer excellent rust and corrosion protection down to -35 °F.
SUPERFILM 5000® MULTI-VIS 5000 HOUR HYDRAULIC OIL #ARL-388 (10W40) USDA: H2
The top hydraulic oil performer in the industry. The unique additive package used in "Super 5000" resulted in 5000 plus hours performance on the A.S.T.M. D-943 Oxidation Test more than twice the life of other petroleum base hydraulic oils.
MOISTURE DISPLACER® Non-Flammable Aerosol or 5 gallon pail #CPT216
A non-flammable penetrating spray that creeps under and displaces moisture in wet electrical systems. Cleans away corrosion to help restore correct current flow. Provides a waterproof film that protects parts and prevents moisture induced short circuits. Safe to spray on running electrical equipment. Hundreds of automotive uses.
Misty®MOISTURE GUARD Non-Flammable #LAMR-A391 USDA: H2
A nonflammable combination of special water displacement compounds, corrosion inhibitors, solvents and non-greasy lubricants. Use to displace water and moisture from electrical equipment. Leaves a protective coating which repels moisture and prevents corrosion for prolonged periods of time. Meets most military specifications. 19 oz. Aerosol. 12 cans per case.
SUPERFILM® ENGINE OILS #ARL-411 (SAE30) AND ARL-412 (SAE15W-40)
This is an outstanding universal SH/CF-4 extended drain engine oil that meets or exceeds all the specifications for gas or diesel engines.
XL-7® ENGINE OILS #ARL-411M (SAE30) AND #ARL-412M (SAE15W-40)
Meets MIL-L-2104F, MIL-L-45199B, MIL-L-46152D and A.P.I. SH/CF-4
This is an outstanding motor oil which combines an organic molybdenum compound (Mach 2) with the finest quality base oils, that far surpass the service requirements of most oils, and adds years of trouble free performance to diesel gas and LPG engines. This product exceeds the performance requirements of DETROIT DIESEL, MACK EO-L, MACK EO-K/2, CATERPILLAR S-3,
CATERPILLAR® TO-2 AND VOLVO B-20. Exceeds Ford, Chrysler and I.H. requirements for alkyl zinc.
Misty® SLIP SHOT II® MULTI-PURPOSE LUBRICANT #LAMR A727 USDA: H2
A multipurpose lubricant that sprays a thin, penetrating liquid that quickly becomes a thick red grease capable of clinging to vertical surfaces. Withstands heat to 500 degrees and resists throw-off. Additives provide superior adhesive, cohesive, extreme pressure and cushioning properties. This formula lubricates and prevents oxidation and rust. 12 oz. Aerosol. 12 cans per case.
S.L.A.P. STICK® SYNTHETIC LUBRICANT #S7305
A synthetic multi-purpose lubricant capable of handling a wide range of lubrication applications. Extreme pressure capabilities and water-resistant.
3-IN-ONE® MULTI-PURPOSE OIL
Relied on for over 100 years to lubricate hinges, sewing machines, fan motors, sporting goods, tools, locks and more. Triple action formula protects moving parts against rust and corrosion as it lubricates and cleans. Unique drip tip allows for precise application. 3 oz. Drip can. 24 cans per case.
WD-40® MULTI-PURPOSE LUBRICANT USDA: H2 8 oz. Aerosol: #LWDS-10108,
11-oz. Aerosol: #LWDS-1011, 16 oz. Aerosol #LWD-10116, Gallon Can: LWDC-10110
A leading, multi-purpose lubricant that stops squeaks. Cleans and protects tools, gears, and other mechanisms, even removes stickers and adhesives.
WD-40® SPRAY APPLICATOR #LWDC-10100
Empty, plastic trigger spray bottle. 4 bottles per case.
GEAR PLUS® (Advanced Technology Gear Oil Treatment with MSX-4 Friction Reducer) #ARL-371
This product is an exceptional gear oil treatment that will enhance the performance characteristics of automotive and industrial gear oils. It will provide these additional benefits: extended oxidation stability, exceptional defoaming and demulsibility, improved seal sealing, extra rust and corrosion protection, smoother shifting of manual transmissions and reduced fuel/power consumption. This product is recommended for use in manual transmissions, gear reduction units, manual transaxle assemblies, standard, posi-trac and limited slip differentials and other equipment requiring an extreme pressure gear oil.
IMPROVED X-20 MOTO GUARD OIL CONDITIONER #ARL-424
This improved, highly viscous, oil conditioner that is fortified with superior oxidation inhibitors to lengthen oil life, increase viscosity, reduce blow by, improve compression, decrease wear and oil consumption in internal combustion engines. For general use to obtain maximum results in oils or gear lubes, use at the rate of 1 pint to every 4-5 quarts.
A super-slick P.T.F.E. engine treatment specially formulated to coat internal engine parts resulting in reduced friction and wear and improved engine performance for over 50,000 miles. Gas or Diesel engines.
DE AQUA LUBE II® PENETRANT, LUBRICANT, DEMOISTURANT Aerosol #CPT220
A chlorinated, high solvency penetrant that quickly cuts through dirt, rust and scale to creep into parts which have become frozen or encrusted with corrosion. Provides long lasting lubrication reduces friction and will not become dry or brittle. Seals water from treated surfaces. Helps dry out and protect wet electrical gear and other moisture sensitive parts. Non-flammable. Includes extension tubes. Also available in liquid form.
DL-2001® PENETRATING OIL #S7336 USDA: H2
A moisture displacing lubricant for loosening rusted parts and eliminating squeaks. Flash Point: 174 °F.
LIGHT OIL LUBE® Aerosol or 5 gallon pail #CPT944
A clean, clear, general purpose, light duty lubricating oil. Economical solution to many lubricating jobs. Excellent penetration and creep properties. Safe for use on aluminum. Helps prevent adhesion of mortar to aluminum window frames. Includes extension tubes.
Misty® PENETRATING LUBRICANT Aerosol #LAMR-A390 USDA: H2
A four-in-one spray used to loosen, clean and lubricate frozen nuts, bolts, and moving parts. Also, stops and prevents corrosion. Ideally suited for refrigeration equipment, automobiles, workshops, etc. 19 oz. Aerosol. 12 cans per case.
NUT AND BOLT LOOSENER® NON-FLAMMABLE Aerosol or 5 gallon pail #CPT213
A non-flammable penetrating spray that cuts through rust and corrosion to loosen frozen nuts and bolts. Leaves a never dry residual film that lubricates and prevents further rust. Regular use helps assure free and easy movement of mechanical parts. Helps cut time on any maintenance or repair job. Includes extension tubes.
ONE TOUCH® PENETRATING LUBRICANT Aerosol or 5 gallon pail #CPT501
A forceful spray that provides rapid penetration through rust and corrosion to loosen frozen nuts, bolts and mechanical parts. Provides effective lubrication over a broad temperature and pressure range. Safe on aluminum, plastic and paint. Contains Moly and TeflonÆ for superior lubrication, and wear reduction Includes extension tubes.
PENETRATING GEL LUBRICANT - Aerosol #CPT947
High tack lubricating gel, which provides superior lubrication from -30 to 500 °F. Penetrates as an oil to lubrication point then forms into a tacky, grease-like gel. Contains Teflon® for added friction reduction. Resists water washout and weathering. Residual film prevents rust and corrosion. Includes extension tubes.
PENETRANT, LUBRICANT, DEMOISTURANT, PROTECTANT #CPT209
An all-purpose, non-flammable, non-conductive mechanic's spray. Penetrates through rust and corrosion to loosen frozen nuts and bolts. Displaces moisture in wet electrical systems. Leaves treated surfaces protected with residual anti-corrosive film. Does not contain any chlorinated solvents. Safe around most plastic and paint. Features a non-flammable spray. Available in aerosol or liquid form. Includes extension tubes.
AUTOMOTIVE SILICONE Aerosol #CPT750
A unique combination of silicone and oil, which lubricates, protects and leaves surfaces coated with a never dry residual film. Forms a thin flexible film that seals out moisture and corrosion. Restores body, moisture and life to dried out rubber surfaces. Lengthens the life of weather stripping and rubber automotive seals. Excellent as a tire sidewall dressing. Stops annoying squeaks and binding of automotive hinges and window tracking.
FOOD GRADE SILICONE SPRAY Aerosol or 5 gallon pail #CPT590
The highest USDA authorized, high viscosity, ultra pure, lubricant for use on food processing and packaging equipment. Leaves a waterproof, dry, non-staining, clear film. Heat stable from -40 to 450 °F. Contains no chlorinated solvents.
INDUSTRIAL SILICONE SPRAY Aerosol or 5 gallon pail #CPT595
A pure, non-staining dry lubricant and release agent. Reduces friction and eliminates sticking and binding of metal, rubber, plastic and laminated surfaces. Repels moisture. Heat stable from -40 to 450 °F. Non-chlorinated.
Misty® ALL PURPOSE SILICONE Aerosol #LAMR-A325 USDA: H1
Heavy duty, thick viscosity silicone is formulated to provide superior lubrication and protection without the use of ozone depleters or chlorinated solvents. Safe to use on virtually any surface, even moving parts! Acts as a water and weather barrier or electrical insulator. Prevents sticking, squeaking, and freezing of doors, windows, locks and assemblies. 11-oz. Aerosol. 12 cans per case.
Misty® ECONOMY SILICONE Aerosol #LAMR-A324 USDA: H2
Light-duty silicone formulated to provide all-around protection, lubrication and restoration to rubber, plastic and vinyl. Also, used to reduce friction on cutting tables, sewing needles, knives and cutters. Will not freeze or melt or be effected by oil or water. USDA: H2. 11 oz. Aerosol. 12 cans per case.
WET SILICONE® Aerosol #CPT751
A unique combination of silicone and oil, which lubricates, protects and leaves surfaces coated with a never dry residual film. Forms a thin flexible film that seals out moisture and corrosion. Restores body, moisture and life to dried out rubber surfaces. Lengthens the life of weather stripping and rubber seals.
ALL-IN-ONE AUTOMATIC TRANSMISSION FLUID® #ARL-391
This premium ATF meets the requirements of GM DEXRON III, Ford Mercon, Daimler-Benz, Detroit Diesel Allison Type C-4 and Caterpillar TO-4. Eliminates the need to stock several different types of automatic transmission fluids.
SUPERFILM UNIVERSAL TRACTOR FLUID® #ARL-390
This is a superior multi-purpose oil to be used for industrial or farm equipment requiring a hydraulic transmission fluid using a central reservoir. Performs in hydraulic transmissions, wet clutches and wet brakes. S.A.E. Grade 20.
DRY RELEASE® TEFLON LUBRICANT AND RELEASE AGENT Aerosol #CPT810
A chemically inert, non-oily, fast drying lubricant and release agent containing an extremely fine Teflon® powder. Features outstanding microscopic film forming properties, more slippery than silicone. Provides superior friction reduction in all metal on metal, rubber on metal and metal on plastic applications.